Parse Burning Image Fail, How to Fix It Step By Step Guide

We know how frustrated it is when you’re trying to install an image file on your android box, whether it’s Probox EX, MXQ PRO, Minix Neo X8-H, or M8s, and found things do not go smooth as expected. It’s Monday night past your working hours. You’ve searched for any possible cause why you cannot get past the error message.

Don’t fret. We’re here to revisit the steps to make it work.

First, check if your firmware is correct and the latest, verify with MD5 hash if you have it. Some errors could come from ROM image files that get corrupted.

To get the latest firmware, go to the official device maker.

Secondly, check out and install the latest Amlogic USB Burning Tool version here or from here. It is a USB burning tool specifically to flash stock firmware based on an Amlogic chipset. Many reported that the file works wonders. Amlogic USB Burning Tool helps you flash the stock firmware on the Mobile phone operating on the Amlogic Chipset.

After the installation process and setting up the Amlogic Burning Tool, you need to load the firmware by clicking on the File > Import Image (img). Then after connecting your Mobile phone to the computer system, click on the start button to begin the flashing procedure.

For Windows 8 and 8.1, you will need to disable driver signature enforcement to install the burning tool successfully.

Here’s how to do it:

Run command from an Administrator Command Prompt to do this. To release one, right-click the Start button or press Windows+X and select “Command Prompt (Admin)

Paste the following command into the Command Prompt window and press Enter.”

bcdedit /set testsigning on

If you see a message stating the value is “protected by Secure Boot policy,” that means Secure Boot is made possible for your computer’s UEFI firmware. You’ll need to disable Secure Boot in your computer’s UEFI firmware (likewise called its BIOS) to enable test finalizing mode.

Parse Burning Image Fail

Restart your computer system to enter test mode. You’ll see the “Test Mode” watermark appear at the bottom ideal corner of your desktop, and you’ll be totally free to install whatever unsigned motorists you desire.


You may need to switch between Amlogic Burning Tool versions for the latest compatibility.

This is the key to make the installation work and get rid of the fail message

Parse Burning Image Fail
successful install without parse fail

After that, extract all the files in the zip to a freshly formatted SD Card. By this stage, you already passed the error message.

You need to put the TV box in flash mode. It is also called recovery mode. Make sure the power IS NOT connected, and Insert the SD Card into your device. If you are uncertain, consult your TV box manual guide.

In the back of the device, Locate the A/V port and insert a toothpick, pin, or something not conductive into the hole. You should feel a button being pressed. If you bricked it with no reset hole, there is a socket for a reset button on the PCB inside, near the power button. It depends on the type.

reset with a toothpick or pin

Press and hold the Button in the A/V hole while plugging in power. Keep holding the button for 10 seconds.

You need to see a green Android robotic with a progress bar listed below if you did the actions properly. DO NOT TURN OFF THE POWER OR TOUCH THE BOX!

Parse Burning Image Fail

When the upgrade is finished, your box will immediately reboot on its own. The very first boot will take a while so that you can make yourself some coffee or tea.

If all still failed, you may need to go deep into troubleshooting the box

  • Try with the latest firmware and the latest Amlogic USB Burning Tool version first.
  • If it’s still failed at some steps, the screen turns blue. Try to downgrade the firmware version and keeping the latest Burning Tool Version.
  • Check if already unpack the .img file
  • Many users reported success with the Amlogic USB Burning Tool version 2.0.8, or, and the image from here.
  • Some manufacturers require a specific .img file for their motherboard. Make sure you have this.
  • You may need to change the device temperature settings. Some users reported this works.
  • If you are stuck in the image load process, you may need to check your USB connection, change the USB cable or port.

Also, if your device is completely bricked after your attempts, you may need to un-brick it. You can follow this tutorial.


Firmware upgrade for your smart TV box can be done at home by yourself, whether you’re not tech-savvy. In the worst case, you will need to unbrick the device. As long as the hardware is running properly, this is not a problem. Watch for any USB burning tool error.

The component in this tutorial is mainly for the motherboard version compatibility with your firmware and Burning Tool and to make sure the device configuration and connection support the upgrade (temperature settings, USB cable, and ports).

We hope this tutorial is useful for you when you upgrade your box firmware and get through the error message.


Leave a Comment